Each of the six original Shelby Daytona Coupes were built on vintage AC chassis. Racing rules changed at the end of the 1964 season to allow for the “modification” of the exterior body shape, while using the same frame/chassis of an existing approved design.
What Factory Five did with the Gen 3 Coupe was the opposite. Keeping the period-correct, authentic body shape, but designed an all-new modern chassis upon which this great car is built.
The Factory Five Racing Type 65 Coupe frame has been computer designed to be extremely strong and light.
The frame comes fully assembled, ready to accept bolt-on components. You can choose between bare steel, or an optional gloss black powder coating.
Factory Five have kept the interior period correct and functional like the 1965 car but they've added some modern comforts and controls like supportive seating, air conditioning, and improved visibility.
The kits come with a complete high-quality interior items like the original style bucket seats and the beautiful wood and aluminium vintage-style steering wheel.
Safety items like a robust race-standard roll cage, and 5-point racing harnesses for passenger and driver round out a distinctive package which
Factory Five offer both LHD and RHD kits.
The Factory Five Type 65 Coupe backs up its dramatic good looks with performance to match — something that is rare in the kit car world. A modestly built FFR Coupe powered by a 345hp Ford Racing 302 crate engine will sprint to 60 mph in less than four seconds! It will also out-brake a Ford GT and out-handle a brand new Porsche 911 Carrera.
Factory Five Cars Daytona Coupe Performance:
Tested by Car and Driver Magazine, November 2000
Engine:
Drivetrain:
Suspension:
Vehicle:
Construction:
Our Factory Five Type 65 Coupe Daytona kits contain:
Frame
Body
Chassis aluminium panels
Complete Front and rear suspension
Brake kit
Complete steering, fuel and cooling systems
Misc. engine accessories/side exhaust
Driveshaft
Gauges, dash and electrical assembly
Interior accessories
Exterior accessories and lighting
Electrical parts and assemblies
Ford 302 engine accessories (if running 302)
Fasteners
and the Type 65 Coupe Assembly Manual
The extra parts you are going to need on top of the base Kit will be:
Please reach us at info@tech-autos.co.uk if you cannot find an answer to your question.
Frame:
Complete jig-welded tube frame, 95” wheelbase chassis. Includes all mounts ready to accept small block Ford 302, 351, and 5.0L Coyote engines.
Optional gloss black powder coating (£415.83)
Includes full roll cage and SCCA style rear crossbar in cockpit
Body:
• Hand laid 3/16” laminate composite body includes hinged nose, main rear clip and doors with • hinged glass rear window. Made with high quality vinylester resin.
• Driver and passenger doors with moulded door liners and DOT door latches
• Front nose section with hinge kit. Includes gas strut piston supports, fasteners and under nose body mount supports
• Original style moulded-in hood scoop and fog light recesses
• Rear main body section comes with separate rivet-on rear spoiler
• Optional style scoops and foot box vents
• Includes secondary body fasteners
• Adhesive backed foam weather-strip
• Body mount fasteners
• Engine bay and rear trunk area seal, push on rubber bulb seal
• Rubber hood and hatch bumpers
• Includes adjustable door hinges/latches
• Includes an opening vintage rear hinged glass window and struts
• Includes glass front windshield (DOT safety glass windshield and hatch)
• Includes air scoops
Chassis Aluminium Panels:
Includes over 20 precision CNC cut, pre-formed 6061-T6 aluminium panels for cockpit (floors, Trans cover, and foot boxes), rear trunk area, and engine bay/ firewall/ splash guards.
• 1,200 pre-packaged rivets: 1/8” and 3/16” short and long
• Complete cockpit aluminium with pre-formed foot boxes, floors and transmission tunnel. Includes Speedo cable block-off plate and Trans harness block off plates. Also includes aluminium dash with cut-outs.
• Engine bay aluminium assembly with aluminium radiator duct surrounds and splash guards
• Complete aluminium trunk area
Complete Front Suspension:
Unequal length control arms with coil-over shock suspension. Comes complete with all parts and fasteners.
• KONI™ brand high performance mono-tube, rod-end shock absorbers
• Coil-over kit for KONI™ shocks including spring hat, threaded seat and 500lb. black powder coated springs
• Adjustable upper control arms with ball joints and fasteners
• Lower tubular control arms with ball joints and fasteners
• Grade-8 mounting hardware
• FFR forged steel spindles with fasteners
Rear Suspension:
High-end 3-link deluxe rear suspension is standard on complete kits. Designed to be used with Ford 8.8” rear solid axle. Comes with all fasteners and hardware required.
• FFR Deluxe 3-Link suspension kit with rear-end brackets, upper link kit, fasteners, including panhard bar kit with rod-ends and grade-8 fasteners
• KONI™ brand high performance mono-tube, rod-end shock absorbers
• Coil-over kit for KONI™ dampers including spring hat, threaded seat and 350lb. black powder coated springs
• Factory Five forged aluminium rear lower control arms, with polyurethane bushings and fasteners
Or select our 2015 Mustang independent rear suspension option ( £2,082.50 extra):
• Welded tubular steel IRS frame
• Upper and lower control arms with bushings, grease fittings, and fasteners, powder coated gloss black
• Left and right IRS toe adjustment arms with rod ends and fasteners, powder coated gloss black
• KONI coil-over shocks with coil-over kit, springs, and fasteners
• Right and left CV axles
• Rear wheel studs
• IRS e-brake cable adaptor
• Differential mounting components, bushings, and fasteners
• Driveshaft adapter for manual cast iron centre section
Brake Kit:
• Front hubs, fasteners and dust covers
• Front Brakes, Ford Mustang GT 11” front rotors with twin piston PBR aluminium calipers, brake pads & fasteners
• Master cylinders (listed in pedal box assembly), stainless braided brake lines, front and rear with mount clips, banjo bolts and brake line mounting fasteners
• Pre-flared 3/16” brake lines and brake line T-adaptor
• OEM Ford emergency brake handle, fasteners
Complete Steering System:
Complete steering system using 15:1 manual rack from tie rod ends and fasteners to vintage steering wheel and badge. Collapsible design.
• 15:1 Aluminium manual steering rack with inner and outer tie rod ends and fasteners
• Polyurethane steering rack bushings and fasteners
• Steering rack shaft adaptor 9/16”-26 spline and lower steering shaft
• Upper steering shaft, spring washers and fasteners
• 14” Vintage wood and aluminium steering wheel with boss and FFR centre section and fasteners
• Steering bearings and hardware, including 1” flange bearing, pillow block bearing and fasteners
Complete Fuel System/Parts:
Based on OEM Ford Mustang fuel tank and system, this assembly provides everything from the gas cap to the lines, and is designed to work with carburetted or fuel injected systems. External fuel pump required.
• OEM Ford fuel tank with mounting straps and hardware, vents, gaskets, pick-up and fuel level sending unit
• Fuel lines, flex lines, unions and barb connectors and filler neck
• Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high press flex lines and fasteners
• Aston Le Mans style polished aluminium fuel cap with integral plastic OEM style pressure cap, gaskets, ground strap, fuel hose to tank extension with fasteners
• Fuel filter, connectors and hose clamps
Complete Cooling System/Parts:
Electric cooling fan, thermostat, relays and mounting kit with hardware. Cooling system also includes stainless steel radiator hoses, and all necessary fasteners.
• Electric cooling fan, high flow 16” puller, with mounting kit and connectors
• Aluminium radiator, in-line filler neck, and pressure cap
• Radiator mount kit and fasteners
• Stainless Steel radiator hose kit incl. adaptor kit, fasteners and hose
• Overflow tank with cap, hoses, hose clamps and mounting hardware
• 185 degree thermostat switch and wiring
Misc. Engine Accessories/Side Exhaust:
Exhaust/Mounts: The Type 65 base kit is configured to accommodate the Ford 289, 302, 351W, or 5.0L Coyote engines. Kit comes with alternate drive pulley assembly, oil filter relocate kit, and exhaust assembly to adapt Mustang engine and headers to vintage side exit exhausts.
• J-pipes side exhaust, bare steel with rubber hanger brackets, gaskets and fasteners
• Alternate drive pulley, spacer, pulley wheel and fasteners
• Air filter, conical
• Custom length fan belt
• Universal accelerator cable assembly includes cable, return spring and retainer
Driveshaft:
The Coupe kit allows you to select from several available drive shafts with fasteners to match the engine/trans of your choice. Select one of the following:
• 28 spline driveshaft for 302/351W with T-5 transmission
• 28 spline driveshaft for 2015 IRS, 302/351W with T-5 transmission
• 31 spline driveshaft for 2015 IRS, 5.0L Coyote with 6-speed transmission
• 31 spline driveshaft for 5.0L Coyote with 6-speed transmission
• 31 spline driveshaft for 5.0L Coyote with TKO transmission
• 31 spline driveshaft for 302/351W with TKO transmission
• 31 spline driveshaft for 2015 IRS, 302/351W with TKO transmission
• 31 spline driveshaft for 2015 IRS, 5.0L Coyote engine with TKO transmission
• 31 spline driveshaft for 302/351W with 6-speed transmission
Gauges, Dash, and Electrical Assembly:
• Type 65 Coupe style aluminium dashboard with fasteners
• Custom fit chassis wiring harness
• Ignition switch and FFR key, headlight switch, 3-position turn signal switch, starter solenoid and horns
• Red, green, blue indicator dash lights
• Wiring harness mounting kit and hardware incl. Fuse panel mount
• On/off switch, horn button, flasher and connectors
• Battery ground strap
• Complete set of 7 Autometer brand electronic gauges, with connectors, terminals and installation kit. Includes the following gauges:
• Speedometer
• Tachometer
• Oil Pressure Gauge
• Water Temperature Gauge
• Fuel Level Gauge
• Voltmeter
• Oil Temperature Gauge
OR select optional:
• Complete set of 7 vintage FFR Replica gauges with connectors, terminals
and installation kit includes: (£354.17)
• GPS Speedometer, reverse read
• Tachometer
• Oil Pressure Gauge
• Water Temperature Gauge
• Fuel Level Gauge
• Voltmeter
• Clock
Interior Accessories:
• Authentic design Coupe bucket seats, black vinyl with fasteners
• 5-point Simpson brand harnesses
• Steel inner door frames and door handles, hinges, latches and leather check straps
• Emergency brake boot, black vinyl
• High-quality fabric headliner
• Authentic interior rear view mirror with fasteners
• 7 piece electronic gauge assembly
• Stainless steel shifter handle, shift knob, boot, polished ring and fasteners
Exterior Accessories and Lighting:
• Gas struts for tilt nose and rear hatch
• Authentic license plate light and bracket with fasteners
• High quality laser-cut aluminium mesh vents for nose/sides and rear brake ducts on tail
• Ceramic FFR nose badge
• Polished side view mirror, original style
• Original style headlamps (DOT) with buckets, halogen headlamps, trim rings, wiring pigtail, adjustment screws and fasteners
• Lexan headlight covers and fasteners
• Lexan rear 1/4 side windows and fasteners
• Front turn signals, original style small amber indicators
• Rear turn signals, red LED rear tail-lights
Electrical Parts and Assemblies:
• Battery tray, J-bolts, cables and hold-downs with fasteners
• Battery cable, pre-cut, pre-assembled 4-gauge positive cable with terminal covers
• Insulated line clip hardware and fasteners
• Cable ties, wire loom and flex grommet
Complete Pedal Box Components:
• Wilwood pedal box and hardware
• Master Cylinders clutch quadrant, clutch cable, firewall cable adjuster, fasteners
• Accelerator pedal and accelerator cable. Return spring and ball stud retainer
Ford 302 Engine Accessories: (if running 302)
Parts to install engine in your coupe.
• Alternate drive pulley, spacer, pulley wheel and fasteners
• Air filter, conical
• Fan belt, six rib
Fasteners:
More than 1,500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners, numbered and packed by assembly.
Type 65 Coupe Assembly Manual:
Bound assembly manual that is over 200 pages long.
Web design by Glenn Braley Marketing
Copyright © 2023 Tech Autos - All Rights Reserved.
Tech Autos Ltd. 12417622
This website uses cookies. By continuing to use this site, you accept our use of cookies. Privacy Policy